Commercial & Industrial RO Plant in Maharashtra
Ethix Water Solutions provides commercial and industrial reverse-osmosis systems for drinking-water, process-water and utility-water requirements across Maharashtra. RO plant capacity and pre-treatment should be selected from the feed-water report, output demand, recovery target and application.
When Does Your Project Need This Solution?
Start with the problem, test the water or wastewater, then size the treatment system for the actual duty.
RO can be selected where the required treated-water quality needs dissolved-solids reduction.
Pre-treatment and recovery should be reviewed when source-water chemistry changes.
Calcium, alkalinity, sulfate, silica and recovery can influence scaling risk.
Iron and suspended solids may require treatment before the RO membrane.
An existing plant may need performance review, membrane care or capacity assessment.
Hotels, hospitals, institutions and factories need sizing around peak and daily demand.
How Ethix Approaches System Selection
A transparent process helps prevent under-sizing, unnecessary stages and poor operating performance.
Check TDS, hardness, pH, iron, turbidity, alkalinity and other relevant values.
Define required permeate LPH and daily treated-water demand.
Select media, cartridge, dosing, UF or other stages where required.
Size pump, membranes, instruments and recovery around the application.
Add UV, storage or other final treatment only when required.
Track flow, pressure, conductivity, filters, dosing and membrane performance.
Information Needed for Technical Sizing & Quotation
For a faster quotation, share the latest test report and operating requirement. Capacity should be selected from flow and treatment duty rather than from a generic package name.
| RO capacity | 25 LPH to 10,000 LPH listed by Ethix |
|---|---|
| Feed-water quality | TDS, hardness, iron, turbidity, pH and source |
| Required outlet | Target treated-water quality for the application |
| Recovery | Must suit feed chemistry and membrane design |
| Operating hours | Determines storage, production and redundancy |
| Automation | Manual, semi-automatic or automatic controls as required |
Where This Solution Is Used
System sizing should follow actual capacity, water quality, operating conditions and site requirements.
System sizing should follow actual capacity, water quality, operating conditions and site requirements.
System sizing should follow actual capacity, water quality, operating conditions and site requirements.
System sizing should follow actual capacity, water quality, operating conditions and site requirements.
System sizing should follow actual capacity, water quality, operating conditions and site requirements.
System sizing should follow actual capacity, water quality, operating conditions and site requirements.
Project Enquiries Across Maharashtra
Ethix Water Solutions is based in Pune and supports genuine project enquiries across Maharashtra. Service feasibility depends on project type, scope and location.
Frequently Asked Questions
What RO plant capacity is available?
Ethix currently lists commercial and industrial RO systems from 25 LPH to 10,000 LPH.
Can RO treat borewell water?
Yes, in suitable applications, but the borewell-water analysis should determine pre-treatment and operating recovery.
Does every RO plant need the same pre-treatment?
No. Pre-treatment depends on feed-water chemistry and the membrane-system design.
How do I get an RO plant quotation?
Share the water report, required LPH, daily demand, operating hours, location and intended use.
Do you provide RO AMC?
Ethix has a separate RO plant AMC and maintenance service offering for commercial and industrial systems.
Explore Related Water Treatment Products
Get a Water-Test Based Technical Recommendation
Share your report, required capacity, end use and project location with Ethix Water Solutions for preliminary sizing and quotation guidance.
Emerging Ethix Power Pvt. Ltd. • Holkar House, Near Navale Bridge, Vadgaon Budruk, Pune, Maharashtra 411041
