Maharashtra
08048055240
+917620256566

ETP plant for industry in Pune

Pune • Chakan • Bhosari • Ranjangaon • Industrial Wastewater

ETP Plant for Industry in Pune – Industrial Effluent Treatment Solutions

Ethix Water Solutions supports industrial effluent-treatment projects in Pune for manufacturing and process facilities. ETP design is based on actual wastewater chemistry, average and peak flow, production process, chemical use and the required discharge or reuse objective.

Industrial ETPProcess WastewaterChemical + Biological TreatmentSludge PlanningPune Industrial Support
Quick Answer: An industrial ETP cannot be selected only by KLD capacity. Two factories with the same wastewater flow may need very different treatment because pH, COD, BOD, TSS, oil & grease, salts, metals, chemicals and biodegradability can differ. A representative effluent report and process information are essential before treatment design.

Industries That May Require Project-Specific ETP Design

Pharmaceutical & Chemical

Wastewater chemistry can vary widely with production, washing cycles, solvents and chemicals. Detailed characterisation is required.

Food & Dairy

Organic load, fats, oils, grease and cleaning chemicals can create variable wastewater conditions.

Food & Dairy ETP page →

Manufacturing & Engineering

Oil, coolant, metal-finishing or process contaminants require treatment based on the actual manufacturing line.

Textile & Process Units

Colour, chemicals, salts and organic load can require multi-stage treatment and careful monitoring.

Commercial Production Units

Central effluent collection and treatment may be needed where process wastewater differs from domestic sewage.

Existing ETP Upgrades

High COD, poor settling, sludge issues, odour or unstable output should be diagnosed before equipment replacement.

Typical Industrial ETP Planning Flow

01 • Characterise

Effluent Testing

Representative samples, flow pattern and process sources are reviewed.

02 • Equalise

Flow & pH Control

Equalisation and pH correction may be used where required.

03 • Treat

Physico-Chemical / Biological

Coagulation, clarification, biological treatment or other processes are selected by wastewater characteristics.

04 • Polish

Filtration & Final Treatment

Further polishing is selected around final water-quality requirements.

What Should You Send for an ETP Proposal?

  • Industry type and production process
  • Average and peak wastewater flow
  • Representative effluent report
  • pH, BOD, COD and TSS
  • Oil & grease where applicable
  • Metals, salts or process chemicals where relevant
  • Operating hours / batch pattern
  • Existing tanks and civil structure
  • Available installation footprint
  • Desired discharge or reuse objective
  • Sludge-handling requirement
  • Existing ETP problems, if upgrading

ETP vs STP: Which One Does Your Facility Need?

PointSTPETP
Main wastewater sourceDomestic sewageIndustrial/process effluent
Design basisOccupancy, sewage flow and domestic wastewater loadProcess chemistry, effluent analysis, average/peak flow
Treatment complexityDepends on project and reuse targetCan vary greatly by industry and contaminants
Best first stepFlow + inlet sewage analysisRepresentative effluent characterisation + process review

Industrial Areas Around Pune

Project enquiries can be assessed across Pune and surrounding industrial belts such as Bhosari, Chakan, Talegaon, Ranjangaon, Pirangut, Hadapsar and other Pune district locations. The correct treatment proposal depends on the site's wastewater data, not just its location.

Frequently Asked Questions

How much does an industrial ETP cost in Pune?

Cost depends on flow, wastewater chemistry, treatment stages, automation, materials, civil scope and sludge handling. An effluent report is required for a meaningful estimate.

Can the same ETP design work for pharma and food industries?

Not necessarily. Wastewater characteristics and treatment goals can be very different. Each project should be designed from representative data.

Can Ethix upgrade an old ETP?

Existing systems can be reviewed for hydraulic, chemical, biological, filtration, sludge and operating-performance issues before recommending an upgrade.

Do I need an effluent lab report before quotation?

For accurate process design, a representative report is strongly recommended. Process details and flow variation are also important.

Can ETP-treated water be reused?

Reuse depends on the treated-water quality, process design, intended application and applicable requirements. Additional polishing may be needed.

Need an Industrial ETP in Pune?

Share your Pune project location, report, required capacity and application. Ethix can review the requirement and guide the treatment direction before quotation.

Related: STP & ETP Pune • Filtration Plants Pune • Water Treatment Plants Pune

Ethix Water Solutions – Pune

Company: Emerging Ethix Power Pvt. Ltd.
Address: Holkar House, Near Navale Bridge, Pune–Bengaluru Highway, Vadgaon Budruk, Pune, Maharashtra 411041
Phone: 08048055240
WhatsApp / Project Contact: +91 88885 20007
Email: sales@ethixwaterconditioner.com
Website: www.ethixwatersolutions.com

For a meaningful proposal, share the project location, water or wastewater report, required capacity, operating hours, end use and available site space.

 2026-09-08T11:43:20

Other Pages

View all pages