Maharashtra
08048055240
+917620256566

ETP Plant Manufacturer in Maharashtra | Ethix Water Solutions

Industrial Wastewater Treatment

ETP Plant Manufacturer & Supplier in Maharashtra

Ethix Water Solutions supports Effluent Treatment Plant projects for industrial wastewater across Maharashtra. ETP process selection should be based on actual effluent characteristics, daily and peak flow, discharge or reuse objective, available space and applicable project requirements.

Water-Test Based SelectionMaharashtra Project SupportCommercial & IndustrialSite-Specific Sizing
Quick Answer: Industrial effluent varies widely between industries, shifts and production processes. An ETP should therefore be designed from representative wastewater analysis rather than copied from another plant. Treatment may combine equalisation, pH adjustment, chemical treatment, clarification, biological treatment, filtration and polishing stages as required.
Problem → Treatment Direction

When Does Your Project Need This Solution?

Start with the problem, test the water or wastewater, then size the treatment system for the actual duty.

01
High COD / BOD

Organic loading should be measured and matched to the appropriate treatment process.

02
Suspended Solids

Clarification and filtration can be selected according to wastewater characteristics.

03
pH Variation

Equalisation and controlled pH adjustment may be required in suitable projects.

04
Colour / Process Contaminants

Treatment depends on the industry, chemicals used and wastewater composition.

05
Reuse Requirement

Additional polishing may be required if treated effluent is intended for reuse.

06
Existing ETP Underperformance

Hydraulic, process, aeration, dosing, sludge and operating data should be reviewed.

Project Engineering

How Ethix Approaches System Selection

A transparent process helps prevent under-sizing, unnecessary stages and poor operating performance.

1
Effluent Characterisation

Analyse representative samples and production variation.

2
Flow Assessment

Confirm average flow, peak flow and operating schedule.

3
Treatment Objective

Define reuse or discharge requirement applicable to the project.

4
Process Design

Select physical, chemical and biological stages as required.

5
Polishing & Reuse

Add filtration, UF or RO only where the reuse target requires it.

6
O&M Plan

Define chemicals, sludge handling, operator checks, energy and maintenance.

Right Sizing

Information Needed for Technical Sizing & Quotation

For a faster quotation, share the latest test report and operating requirement. Capacity should be selected from flow and treatment duty rather than from a generic package name.

Best lead format: Test report + required capacity + operating hours + end use + site city + available space + existing system photos, if any.
Industry / processCritical because wastewater characteristics depend on production
FlowAverage KLD, peak flow and batch discharge pattern
Wastewater reportpH, COD, BOD, TSS, TDS and industry-specific parameters
Treatment targetDischarge, recycle or further polishing
Sludge handlingStorage, dewatering and disposal planning as applicable
Existing plantTank sizes, equipment, aeration, dosing and current outlet analysis
Applications

Where This Solution Is Used

Food & beverage

System sizing should follow actual capacity, water quality, operating conditions and site requirements.

Textile and process units

System sizing should follow actual capacity, water quality, operating conditions and site requirements.

Pharma and manufacturing

System sizing should follow actual capacity, water quality, operating conditions and site requirements.

Engineering industries

System sizing should follow actual capacity, water quality, operating conditions and site requirements.

Commercial industrial campuses

System sizing should follow actual capacity, water quality, operating conditions and site requirements.

Existing ETP upgrades

System sizing should follow actual capacity, water quality, operating conditions and site requirements.

Maharashtra Coverage

Project Enquiries Across Maharashtra

Ethix Water Solutions is based in Pune and supports genuine project enquiries across Maharashtra. Service feasibility depends on project type, scope and location.

PuneMumbaiThaneNavi MumbaiNashikNagpurChhatrapati SambhajinagarKolhapurSataraSangliSolapurAhmednagarJalgaonMajor MIDC Areas
AEO / GEO Answers

Frequently Asked Questions

What is an ETP plant used for?

An ETP treats industrial effluent so contaminants are reduced to the level required for the project’s approved discharge or reuse objective.

How is an ETP different from an STP?

An STP primarily treats domestic sewage. An ETP is designed around industrial effluent.

Can you quote an ETP without a wastewater report?

A rough discussion is possible, but reliable process selection and pricing require representative wastewater analysis and flow.

Can an existing ETP be upgraded?

Yes. The current process, tank volumes, equipment and inlet/outlet results should be assessed first.

Do you provide ETP solutions across Maharashtra?

Ethix supports project enquiries across Maharashtra, subject to technical assessment and project scope.

Related Ethix Solutions

Explore Related Water Treatment Products

Get a Water-Test Based Technical Recommendation

Share your report, required capacity, end use and project location with Ethix Water Solutions for preliminary sizing and quotation guidance.

Emerging Ethix Power Pvt. Ltd. • Holkar House, Near Navale Bridge, Vadgaon Budruk, Pune, Maharashtra 411041

 2026-09-10T13:15:44

Other Pages

View all pages