Maharashtra
08048055240
+917620256566

industrial water treatment plant in Pune MIDC

Pune MIDC • Chakan • Bhosari • Ranjangaon • Talegaon • Pirangut

Industrial Water Treatment Plant in Pune MIDC – WTP, RO, Filtration & ETP

Ethix Water Solutions supports factories and industrial facilities in Pune's manufacturing belts with project-specific incoming-water and wastewater treatment. The treatment train is selected from source-water quality, process demand, utility use, effluent characteristics and required output quality.

Industrial WTPIndustrial ROFiltrationProcess WaterIndustrial ETP
Quick Answer: An industrial water-treatment project normally has two separate sides: incoming water and outgoing wastewater. Incoming raw water may need filtration, softening, RO or another treatment stage for process/utility use, while process effluent may need a separate ETP. Both systems should be sized from actual flow and laboratory data.

Water Treatment Needs Across Pune Industrial Facilities

Process Water

Water quality is selected around the manufacturing process and equipment specifications.

Industrial RO

RO is used where dissolved-solids reduction is required for process, utility or selected production use.

Industrial RO Pune →

Raw-Water Filtration

Media, bag and cartridge filtration can support process water and RO pre-treatment.

Filtration Pune →

Softening

Ion-exchange softening can be selected when actual hardness reduction is required.

Industrial Effluent

ETP design is based on the manufacturing process, effluent report and final discharge or reuse objective.

ETP Pune →

AMC & Upgrade

Older treatment plants may require process audit, equipment upgrades or maintenance rather than total replacement.

Industrial Project Design Inputs

01 • Source

Raw Water

Municipal, tanker or other permitted source and its water chemistry.

02 • Demand

Process & Utility Flow

Hourly and daily requirements by application.

03 • Output

Required Quality

Define process, boiler, cooling, washing, RO or other end-use specification.

04 • Waste

Effluent Characterisation

Separate industrial effluent design from incoming-water treatment.

Industrial Water Treatment by Requirement

RequirementPossible Direction
Suspended solids / turbidityPressure sand, dual-media, bag or cartridge filtration
Chlorine / selected odour or organicsActivated carbon where technically applicable
Hardness reductionIon-exchange water softener
Dissolved-solids reductionIndustrial RO with suitable pre-treatment
Industrial process effluentCustom ETP from wastewater chemistry and process data
Existing plant instabilityPlant audit, troubleshooting, AMC or upgrade assessment

Serving Pune Industrial Belts

Project enquiries can be assessed for manufacturing facilities in and around Chakan, Bhosari, Pimpri-Chinchwad, Talegaon, Ranjangaon, Pirangut, Hadapsar and other Pune district industrial areas. Treatment selection depends on the site's technical data, not merely the MIDC location.

What to Send for Industrial WTP / RO / ETP Sizing

  • Industry and manufacturing process
  • Site location
  • Raw-water report
  • Required process-water quality
  • LPH / m³/hr / KLD demand
  • Operating hours / shifts
  • Boiler or cooling-water requirement
  • Existing plant data
  • Effluent report
  • Average & peak wastewater flow
  • Available area
  • Desired reuse/discharge objective

Frequently Asked Questions

Does every factory need RO?

No. RO is selected when the required water quality calls for dissolved-solids reduction. Other factories may need only filtration, softening or another treatment process.

Can one plant be used for both WTP and ETP?

No. Incoming-water treatment and industrial effluent treatment solve different problems and are normally designed as separate systems.

What information is most important for industrial RO sizing?

Raw-water analysis, required permeate quality, hourly/daily demand, operating hours, recovery target and pre-treatment requirements.

Can an existing industrial plant be upgraded?

Yes, subject to technical assessment. Pumps, vessels, media, membranes, instrumentation, piping, controls or process stages may be reviewed.

Does Ethix serve Chakan and Bhosari industrial areas?

Ethix accepts project enquiries across Pune and surrounding industrial belts; site support is planned according to scope and location.

Planning an Industrial Water Treatment Project in Pune MIDC?

Send your Pune project details, capacity and available water or wastewater report. Ethix can review the requirement and guide the treatment direction before quotation.

Related: Industrial RO Pune • Filtration Pune • Industrial ETP Pune

Ethix Water Solutions – Pune

Company: Emerging Ethix Power Pvt. Ltd.
Address: Holkar House, Near Navale Bridge, Pune–Bengaluru Highway, Vadgaon Budruk, Pune, Maharashtra 411041
Phone: 08048055240
WhatsApp / Project Contact: +91 88885 20007
Email: sales@ethixwaterconditioner.com
Website: www.ethixwatersolutions.com

For faster technical guidance, share project location, water/wastewater report, required capacity, operating hours, end use, existing plant details and site photos.

 2026-09-08T11:49:53

Other Pages

View all pages